March 18, 2009

Electric Meter


So, I finally was able to find my electric meter at my house...I was seriously looking all over for it! Then I asked my mom and she was able to point it out for me, and it was SO high up! Both me and my mom - who took the picture - had to stand on a step stool! But that's probably because we're both so short. Wow, now I know that random men walking around my backyard might not be robbers but electric guys! P.S. I also don't know how to rotate my picture so thats why it is side ways...sorry!

March 8, 2009

Motors


For the past couple of weeks, my 14-year old car has been making noises that have progressively been getting worse. Last night, my dad drove it home to see what was wrong, and actually had to pull on the side of the road to make sure nothing was falling out of my car. This is because, he suspects the motor (engine) holder - which holds the motor in place - is broken. As a result, he thinks my engine is not being held in place any longer, which could be very dangerous if it breaks other things while rolling around under my car. I thought this related to physics because we just learned how a simple motor can be made, with just a wire, a magnet and a battery. Since the magnet's magnetic force exerts a torque on the coil made with wire, the coil will spin due to the the torque and the current that comes from the battery. This is basically what should be happening underneath my car, inside the engine holder. However, if the engine holder is broken (as mine is) the motor that is spinning due to the torque and energy source is free to roll wherever it would like to. Therefore, my dad is forbidding me to drive my car until it gets fixed.

February 15, 2009

Variable Resistors in Beauty Products


This past weekend we had a Valentine's Day Banquet at my church to fundraise for a trip we're going on this coming summer. We had to get all dressed up and act like "professional" waitors and waitresses. Thus, before the banquet I turned on my hair straightener to straighten my hair before the dinner so it wouldn't be all frizzy. My mistake came in turning it on the highest heat possible and leaving it on my unmade bed. It burned right through my mattress!! In all this, I realized that my hair straightener has physics to it because it is a variable resistor! When I turned up the heat, I was actually shortening the length of the conductor which is probably located inside of the straightener. By shortening the length of the conductor, I am decreasing the resistance, allowing the electrons to flow easier and have a greater current. A greater current means that there is more power and as a result, more heat coming from the straightener which is why it burned through my mattress!!

February 1, 2009

Microphones


This past Sunday, my youth group led the worship service at my church. It was a lot of fun because it really brought us together as we prepared for it. Some of us sang, some of us were ushers, some of us signed, and one of the guys in my youth group did the sermon. Anyway, I sang as part of the praise team and (much to my dismay and reluctance) used a microphone. Since I greatly dislike using a microphone, I would always hold it down by my belly button rather than up by my mouth. However, because I did this, the sound people always had to put my microphone on SUPER high and loud in order to pick up my voice. As a result, every time I even came a little bit close to the monitor a loud shrill shreak would sound. I thought that there must be some kind of physics to a microphone in order for it to 1) be able to make that shrill sound and 2) amplify your voice, so I looked up exactly how a microphone works. A microphone gives out an electric signal every time it senses sound pressure variations from your voice. It is made out of a small coil attached to a diaphragm and this coil is free to move inside of a cylindrical magnet. Whenever sound comes into the microphone, the diaphragm vibrates which causes the coil to move up and down between the poles of the magnet and your voice is amplified! I think that the reason why the shrill sound was made every time I came close to the monitor is due to the electric signal that the microphone is constantly giving out. The microphone amplifies every sound that it picks up, including the sound of the monitor. However, the monitor gives off the sound that the mic amplifies. Therefore, there is like a conservation of sound and when you put the mic close to the monitor, they amplify the sounds the other gives off which leads to the shrill shreak. This picture is of one of my best friends Sarah who sang a duet with my youth pastor. She held the microphone correctly (as shown) and sounded awesome!

January 25, 2009

Happy Birthday Great Grandma!


Last night I went to my great grandma's 99th birthday party. It was so much fun because family that I had never met came from the mainland to celebrate with us. We also played a couple of super fun creative games that my uncle prepared for us. One of them reminded me of what we are learning in Physics right now. In this game, we had to pick one person from our table to be dressed up like a reindeer in the most unusual way. At the end, my great grandma would judge who was the best reindeer, and the person she picked, would win. In order to make the antlers, you had to stuff panty hose with balloons. The person who dressed up from our table was my sister. However, we did not use up our balloons the first time because we didn't think they would all fit. But after comparing her to the other "reindeer" we decided to put them all in...except we had the hardest time taking the nylon off her head because the nylon and balloons kept sticking to her hair! This is a result of the attraction that was occuring due to an imbalance of charge caused by friction. After rubbing all the different balloons and the nylon together, the balloons and nylon both had a charge because they either gained or lost electrons. When there is an imbalance, the object attempts to gain neutrality again by attatching to something neutral so share/gain back electrons. Since her hair was still neutral, when we tried to pull off the nylon, it was attracted to her extremely long hair which made it hard to take off.

January 4, 2009

PADDLING :)


This past weekend we had our second paddling race of the season. The race was about three miles long and we paddled through some crazy wind! But, we were successful and we came in third after Punahou and Kamehameha. After the race, I was looking at my paddle when I realized it had physics in it!! When you take a stroke through the water, the lever arm is the length of your arm and the rotation point is your shoulder. As you twist to take a stroke, you are creating a torque when you push down with your top hand. Therefore, if you have a longer arm, then your lever arm is longer and you can pull more water. This is probably why my coach always tells us to twist our bodies out as far as possible and to reach out as far as we can in order to maximize the lever arm. This comes in handy especially upwind when you want your boat to move forward against the wind.

December 13, 2008

Physics at Home


I was sitting at my dining room table eating my dinner and trying to think of what I could use in my journal. Feeling a gust of wind, I stood up to turn the fan off because it was so cold, windy and rainy. Looking at the fan reminded me of what we are learning in physics - the difference between rotational and circular motion. The fan has rotational motion because the axis is within the fan. However, if you were to place an object on the end of one of the fan wings, that object would have circular motion because it's axis would be the fan which is on the outside of the object. If I were to push one of the fan wings with the fan off, my finger would be the force (the torque) and the lever arm would be the distance from my finger to the axis from which the fan is rotating around. I thought that it was really cool how I could find physics in such a simple and often over looked object!